Engine Swap Kit + Turbo Manifold and Downpipe Kit For 2003-2012 Mazda RX-8 With RX-7 FD REW 13B Engine Swap

Comes with: Engine Mount Kit + Single Turbo Manifold + Downpipe

Manifold FitsT4 Turbo, with 3" Vband Exhaust Housing, and 60mm Vband Wastegate

There Are A Few Known Issues with RX8 13B Swap:
1. Stock 13B Twin Turbo Won't Fit.
2. Stock 13B Lower Intake Manifold Won't Fit.
3. Many Swaps Have the Engine Sits Too Low.
4. Engine Oil Filler Won't Fit.

Many People Have to Cut and Hammer the Firewall to Make Things Work. But Our Kit Offers A Simple Solution for the Swap, No Cut, Bolt On Fit.

We Developed This Swap Kit From Scratch, Offers Many New Features and Easy of Installations:

1. Engine Mount Offer Strong Cross Frame Rail Support, Transmission Fits RX8's Stock Transmission Mount.
2. No Need to Hammer or Cut Firewall. Turbo Kit Fits without Cutting Anything.


Note:
1. This Kit Is Developed Based On US Model Left-Hand-Drive. For RHD, We Have Not Tested and Don't Know If There Is Any Fitment Problems(Primary Issue Is Steering Shaft Might Hit Other Parts). We Don't Guarantee Fitment for RHD Chassis.

2. This Kit Is Part Of the Complete 13B/RX8 Swap Kit Offered By Rotary-Works. This Item Is for Engine Mount, Manifold, and Downpipe ONLY. Turbo, Wasteagte, Lower Intake Manifold, Intercooler, Piping Kit, Radiator Hard Pipe Kit ARE NOT Included. We Also Offer These Separately, Check Our Other Items.

Stock Lower Intake Manifold Will Hit Firewall, You Will Also Need To Buy Ours to Make It Fit.

Application:
-Chassis: 2003-2012 Mazda RX8
-Engine: RX-7 FD 13B Turbo
-Note: This Is A Single Turbo Kit, Does NOT Fit Stock Twin Turbo


Product Info and Spec:
Engine Mounts:
-Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
-Adjustable Slotted Bolt Holes
-Polyurethane Bushing Mounts
-Patented Design of Motor Mount is Billet Aluminum, Excellent Strength
-Mounted Across Frame Rails, Offers Excellent Suport

Manifold and Downpipe Kit:
-11 Gauge Thick Wall Manifold
-T4 Flange, 60mm Vband Wastegate Flange
-3" Stainless Downpipe, Fits Stock Location Catback

Notes:
-Off Road or Track Use ONLY, NOT for Street Use
-Due to the Complexity of Swapping a Motor to Different Chassis, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project
-Parts Being Sold are the Kit Being Advertised ONLY. Other Parts Shown on Pictures are for Demo Only (of Our Complete Swap Kit). Check Our Other Items.
-Turbo, Wasteagte, Lower Intake Manifold, Intercooler, Piping Kit, Radiator Hard Pipe Kit ARE NOT Included.

Item Included:
-Engine Mount Kit
-Turbo Manifold with WG Dump Tube
-3" Stainless Downpipe (2 pcs set)


 

Highlights:
-Especially Designed, Made for the Application Stated
-Fully Tested, Simple Easy Installation
-Offers Excellent Performance Gains

Items_Included:
-Engine Mount Kit
-Turbo Manifold with WG Dump Tube
-3" Stainless Downpipe (2 pcs set)

Note: Turbo, Wasteagte, Lower Intake Manifold, Intercooler, Piping Kit, Radiator Hard Pipe Kit ARE NOT Included.

Engine Mount Installed Pictures:

Note: With Our Mount Kit, Oil Pan Sits Approximate 3/4 Inch Lower than the Lower Point Of the Front Cross Support

Turbo Manifold and Downpipe Installed Pictures:

 

   

Write a review

Please login or register to review

13B Turbo Engine Mount Manifold Downpipe For RX8 RX-8 Swap RX7 FD REW

  • Brand: Rotary-Works
  • Product Code: RW-ESK-MF-DP-13B-RX8
  • Availability: In Stock
  • $1,219.00